Cisco HWIC-3G-HSPA with Telstra 3G sim

!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec localtime
service internal
!
hostname 3g-router
!
boot-start-marker
boot-end-marker
!
!
logging buffered 1000000
logging rate-limit 10000
!
!
no network-clock-participate slot 1
!
dot11 syslog
no ip source-route
!
ip cef
!
!
!
chat-script telstra “” “ATDT*98*1#” TIMEOUT 30 “CONNECT”
!
!
controller Cellular 0/2
!
controller Cellular 0/3
!
!
interface Cellular0/2/0
no ip address
ip virtual-reassembly in
encapsulation ppp
dialer in-band
dialer pool-member 2
dialer-group 2
async mode interactive
!
interface Cellular0/3/0
no ip address
ip virtual-reassembly in
encapsulation ppp
dialer in-band
dialer pool-member 3
dialer-group 3
async mode interactive
!
interface Cellular0/2/1
no ip address
encapsulation ppp
!
interface Cellular0/3/1
no ip address
encapsulation ppp
!
interface Dialer2
description TELSTRA 3G 0/2/0
ip address negotiated
encapsulation ppp
dialer pool 2
dialer idle-timeout 0
dialer string telstra
dialer persistent
dialer-group 2
ppp chap hostname dummy
ppp chap password 0 dummy
ppp ipcp dns request
max-reserved-bandwidth 100
!
interface Dialer3
description TELSTRA 3G 0/3/0
ip address negotiated
encapsulation ppp
dialer pool 3
dialer idle-timeout 0
dialer string telstra
dialer persistent
dialer-group 3
ppp chap hostname dummy
ppp chap password 0 dummy
ppp ipcp dns request
!
ip forward-protocol nd
!
ip http server
no ip http secure-server
!
!
!
!
line con 0
exec-timeout 0 0
privilege level 15
transport preferred none
stopbits 1
line aux 0
exec-timeout 300 0
password 7 00101626096C5B1404
modem DTR-active
transport preferred telnet
transport input all
autohangup
stopbits 1
flowcontrol hardware
line 0/2/0
script dialer telstra
modem InOut
no exec
transport input telnet
rxspeed 7200000
txspeed 5760000
line 0/2/1
no exec
rxspeed 7200000
txspeed 5760000
line 0/3/0
script dialer telstra
modem InOut
no exec
transport input telnet
rxspeed 7200000
txspeed 5760000
line 0/3/1
no exec
rxspeed 7200000
txspeed 5760000
!
end

3g-router# sh cellular 0/2/0 all
Hardware Information
====================
Modem Firmware Version = K2_0_7_19AP C:/WS/F
Modem Firmware built = 10/26/09
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 505013466153266
International Mobile Equipment Identity (IMEI) = 011955005285335
Integrated Circuit Card ID (ICCID) = 89610175609553000085
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = C66197206811006
Modem Status = Online
Current Modem Temperature = 48 deg C, State = Normal
PRI SKU ID = 9992680, SKU Rev. = 1.3

Profile Information
====================
Profile 1 = ACTIVE*
——–
PDP Type = IPv4
PDP address = 123.209.179.139
Access Point Name (APN) = telstra.extranet
Authentication = None
Username: , Password:

* – Default profile

Data Connection Information
===========================
Data Transmitted = 1671200329 bytes, Received = 2912511231 bytes
Profile 1, Packet Session Status = ACTIVE
IP address = 123.209.179.139
Negotiated QOS Parameters:
Precedence = Normal Priority, Delay = Class 2
Reliability = Unack GTP, LLC, Ack RLC, Protected data
Peak = 256 kB/sec, Mean = 50000 kB/hr
Traffic Class = Interactive
Uplink Max = 11.5Mbps, Guaranteed = 1.8Mbps
Downlink Max = 16Mbps, Guaranteed = 1.8Mbps
Max SDU size = 1500 bytes
SDU error ratio = 1E-4, BER = 1E-5
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Normal, Service Error = Network failure
Current Service = Combined
Packet Service = HSPA (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = AUS, Network = Telstra
Mobile Country Code (MCC) = 505
Mobile Network Code (MNC) = 1
Location Area Code (LAC) = 1360
Routing Area Code (RAC) = 1
Cell ID = 35441
Primary Scrambling Code = 92
PLMN Selection = Automatic
Registered PLMN = , Abbreviated =
Service Provider = Telstra

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10788
Current RSSI = -82 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x5C
RSCP = -81 dBm, ECIO = -5 dBm

Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of Retries remaining = 3
3g-router#
3g-router#
3g-router#
3g-router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Dialer2 123.209.179.139 YES IPCP up up
Dialer3 123.209.137.192 YES IPCP up up
3g-router#
3g-router#
3g-router#sh ver
Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 15-Nov-10 21:41 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

3g-router uptime is 9 weeks, 7 hours, 8 minutes
System returned to ROM by reload at 09:19:48 AEST Thu Jan 24 2013
System restarted at 09:21:49 AEST Thu Jan 24 2013
System image file is “flash:c2800nm-ipvoicek9-mz.151-3.T.bin”
Last reload type: Normal Reload

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2811 (revision 53.51) with 241664K/20480K bytes of memory.
Processor board ID FHK1149F065
2 FastEthernet interfaces
2 ATM interfaces
4 terminal lines
4 Voice FXS interfaces
4 Cellular interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)